Extreme high speed up to 300 mm/sStand-alone 3D printingFull color displayDual extrusionLargest build volume in its classCompatible with e.g. ABS, PLA, PVA, BrickIncludes 3D Printing / Slicing softwareCreatr High SpeedHS stands for High Speed: printing up to 5 times faster than the regular Creatr. With an astonishing print volume of 14.8 liters and the possibility to print objects up to 30cm of length, the Creatr HS is the most versatile printer on the market. The Creatr HS is also much more convenient since it is stand-alone featuring a 4inch full color LCD screen and the ability to print directly from USB. By standard the Creatr HS is equipped with dual extrusion.High speed 3D printing, print up to 300 mm/sDue to continuous technological development Leapfrog has achieved a significant increase of printing speed. By lowering the weight of the extruder carriage the Creatr HS is capable of printing up to 300mm/s. Faster prototyping for our customers provides them with the ability to benefit ever more from 3D printing.Largest build volumeThe bigger build volume will save you headaches about your model not fitting in your 3D printer. Therefore you no longer have to split up your model in multiple parts and go through the worries that come with assembling it after printing. The Creatr HS has the largest build volume in its class, with an astonishing volume of 14.8L and the possibility to print objects up to 30cm of length!Standard equipped with dual extrusion:Print with water soluble support material enabling full design freedomPrint while using two nozzle sizes for even more speed and efficiency (larger nozzle for inner structures and/or support material)Print with 2 types of materialsPrint with 2 colorsCombine 2 materials in 1 printThe combination of multiple materials broadens the range of applications you can use 3D printing for. With a Creatr HS, you will be up for the hardest tasks. Compatible with many different materials. ABS, PLA, PVA, Nylon, Woodplastic, Birckplastic, and much much more. MAXX filaments are especially developed and tested for Leapfrogs 3D printers. Assuring maximum quality and maximum performance, the Creatr HS prints best with MAXX.Professional software includedKey to making high quality prints in not only a good 3D printer but also a professional software package. Our software features quick print options, as well as an extensive list of settings that can be tweaked to push the printer to its limits! Due to a smart algorithm, slicing is multiple times faster than open source slicers and provides support to our astonishing 10 micron layer resolution!Dual ExtruderThe optional dual extrusion allows you to print with two types of materials at the same time which is crucial in order to print with safe, water soluble support. As you cannot print in mid-air, you will need to print with support structures. Our water soluble PVA support allows users to rinse away the support structures after printing, leaving a clean and high quality print.For designers, dual extrusion offers the opportunity to print with two colors in one print. Go ahead: mix and match your MAXX filaments! Stand-alone 3D printing3D printers should be easy to use, the Creatr HS is equipped with a 4inch full color LCD screen and only 1 knob to control it. Say goodbye to SD cards, run your Creatr HS simply from a USB stick. Preheat and start printing in less than 10 minutes. (USB 3.0 compatible).
This product meets the oversized requirement per UPS/FedEx. The shipping weight reflected is the dimensional weight. This product also meets the large package requirement per UPS/FedEx. The estimated shipping cost will include this fee.Max limits is $110, applied when packages with an actual weight of more than 150 pounds, or that exceed 108 inches in length, or exceed a total of 165 inches in length and girth [(2 x width) + (2 x height)] combined, as measured to determine their billable weight, are not accepted for transportation.